The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

Apache::RPC::Server (3)
  • >> Apache::RPC::Server (3) ( Разные man: Библиотечные вызовы )
  •  

    NAME

    Apache::RPC::Server - A subclass of RPC::XML::Server tuned for mod_perl
     
    

    SYNOPSIS

        # In httpd.conf:
        PerlModule Apache::RPC::Server
        PerlSetVar RpcMethodDir /var/www/rpc:/usr/lib/perl5/RPC-shared
        PerlChildInitHandler Apache::RPC::Server->init_handler
        ...
        <Location /RPC>
            SetHandler perl-script
            PerlHandler Apache::RPC::Server
        </Location>
        </Location /RPC-limited>
            SetHandler perl-script
            PerlHandler Apache::RPC::Server
            PerlSetVar RPCOptPrefix RpcLimit
            PerlSetVar RpcLimitRpcServer Limited
            PerlSetVar RpcLimitRpcMethodDir /usr/lib/perl5/RPC-shared
        </Location>
    
    

        # In the start-up Perl file:
        use Apache::RPC::Server;
    
    
     

    DESCRIPTION

    The Apache::RPC::Server module is a subclassing of RPC::XML::Server that is tuned and designed for use within Apache with mod_perl.

    Provided are phase-handlers for the general request-processing phase ("PerlHandler") and the child-process initialization phase ("PerlChildInitHandler"). The module should be loaded either by inclusion in a server start-up Perl script or by directives in the server configuration file (generally httpd.con). One loaded, the configuration file may assign the module to handle one or more given locations with the general set of "<Location>" directives and familiar options. Additional configuration settings specific to this module are detailed below.

    Generally, externally-available methods are provided as files in the XML dialect explained in RPC::XML::Server. A subclass derived from this class may of course use the methods provided by this class and its parent class for adding and manipulating the method table.  

    USAGE

    This module is designed to be dropped in with little (if any) modification. The methods that the server publishes are provided by a combination of the installation files and Apache configuration values. Details on remote method syntax and semantics is covered in RPC::XML::Server.  

    Methods

    In addition to inheriting all the methods from RPC::XML::Server, the following methods are either added or overloaded by Apache::RPC::Server:
    handler
    This is the default content-handler routine that mod_perl expects when the module is defined as managing the specified location. This is provided as a method handler, meaning that the first argument is either an object reference or a static string with the class name. This allows for other packages to easily subclass Apache::RPC::Server.

    This routine takes care of examining the incoming request, choosing an appropriate server object to actually process the request, and returning the results of the remote method call to the client.

    init_handler
    This is another Apache-level handler, this one designed for installation as a "PerlChildInitHandler". At present, its only function is to iterate over all server object currently in the internal tables and invoke the "child_started" method (detailed below) on each. Setting this handler assures that each child has a correct impression of when it started as opposed to the start time of the server itself.

    Note that this is only applied to those servers known to the master Apache process. In most cases, this will only be the default server object as described above. That is because of the delayed-loading nature of all servers beyond the default, which are likely only in child-specific memory. There are some configuration options described in the next section that can affect and alter this.

    new(HASH)
    This is the class constructor. It calls the superclass "new" method, then performs some additional steps. These include installing the default methods (which includes an Apache-specific version of "system.status"), adding the installation directory of this module to the method search path, and adding any directories or explicitly-requested methods to the server object.

    The arguments to the constructor are regarded as a hash table (not a hash reference), and are mostly passed unchanged to the constructor for RPC::XML::Server. Three parameters are of concern to this class:

    apache
    The value associated with this key is a reference to an Apache request object. If this is not passed, then it is assumed that this is being called in the start-up phase of the server and the value returned from "Apache-"server> (see Apache) is used.
    server_id
    This provides the server ID string for the RPC server (not to be confused with the Apache server) that is being configured.
    prefix
    The prefix is used in retrieving certain configuration settings from the Apache configuration file.

    The server identification string and prefix concepts are explained in more detail in the next section. See RPC::XML::Server for a full list of what additional arguments may be passed to new for eventual proxy to the parent class constructor.

    child_started([BOOLEAN])
    This method is very similar to the "started" method provided by RPC::XML::Server. When called with no argument or an argument that evaluates to a false value, it returns the UNIX-style time value of when this child process was started. Due to the child-management model of Apache, this may very well be different from the value returned by "started" itself. If given an argument that evaluates as true, the current system time is set as the new child-start time.

    If the server has not been configured to set this at child initialization, then the main "started" value is returned. The name is different so that a child may specify both server-start and child-start times with clear distinction.

    get_server(APACHEREQ|STRING)
    Get the server object that corresponds to the argument passed. If the argument is a reference to an Apache request object, use it to determine the name (by path, etc.) and return that object. If the parameter is not a reference, it is assumed to be the specific name desired.

    If the requested server object does not yet exist, an attempt will be made to create it and add it to the internal table. The newly-created object is then returned.

    list_servers
    Return a list of the names used for all the current server instances. Does not return the server objects themselves (use get_server, above, for that).
    version
    This method behaves exactly like the RPC::XML::Server method, except that the version string returned is specific to this module instead.
    INSTALL_DIR
    As with version, this is an overload of the parent-class static method that returns the installation directory of this particular module.
     

    Apache configuration semantics

    In addition to the known directives such as "PerlHandler" and "PerlChildInitHandler", configuration of this system is controlled through a variety of settings that are manipulated with the "PerlSetVar" and "PerlAddVar" directives. These variables are:
    RPCOptPrefix [STRING]
    Sets a prefix string to be applied to all of the following names before trying to read their values. Useful for setting within a "<Location>" block to ensure that no settings from a higher point in the hierarchy influence the server being defined.
    RpcServer [STRING]
    Specify the name of the server to use for this location. If not passed, then the default server is used. This server may also be explicitly requested by the name """<default>""". If more than one server is going to be created within the same Apache environment, this setting should always be used outside the default area so that the default server is not loaded down with extra method definitions. If a sub-location changes the default server, those changes will be felt by any location that uses that server.

    Different locations may share the same server by specifying the name with this variable. This is useful for managing varied access schemes, traffic analysis, etc.

    RpcMethodDir [DIRECTORY]
    This variable specifies directories to be scanned for method "*.xpl" files. To specify more than one directory, separate them with "":"" just as with any other directory-path expression. All directories are kept (in the order specified) as the search path for future loading of methods.
    RpcMethod [FILENAME]
    This is akin to the directory-specification option above, but only provides a single method at a time. It may also have multiple values separated by colons. The method is loaded into the server table. If the name is not an absolute pathname, then it is searched for in the directories that currently comprise the path. The directories above, however, have not been added to the search path yet. This is because these directives are processed immediately after the directory specifications, and thus do not need to be searched. This directive is designed to allow selective overriding of methods in the previously-specified directories.
    RpcDefMethods [YES|NO]
    If specified and set to ``no'' (case-insensitive), suppresses the loading of the system default methods that are provided with this package. The absence of this setting is interpreted as a ``yes'', so explicitly specifying such is not needed.
    RpcAutoMethods [YES|NO]
    If specified and set to ``yes'', enables the automatic searching for a requested remote method that is unknown to the server object handling the request. If set to ``no'' (or not set at all), then a request for an unknown function causes the object instance to report an error. If the routine is still not found, the error is reported. Enabling this is a security risk, and should only be permitted by a server administrator with fully informed acknowledgement and consent.
    RpcAutoUpdates [YES|NO]
    If specified and set to ``yes'', enables the checking of the modification time of the file from which a method was originally loaded. If the file has changed, the method is re-loaded before execution is handed off. As with the auto-loading of methods, this represents a potential security risk, and should only be permitted by a server administrator with fully informed acknowledgement and consent.
     

    Specifying methods to the server(s)

    Methods are provided to an Apache::RPC::Server object in three ways:
    Default methods
    Unless suppressed by a "RpcDefMethods" option, the methods shipped with this package are loaded into the table. The Apache::RPC::Server objects get a slightly different version of "system.status" than the parent class does.
    Configured directories
    All method files (those ending in a suffix of "*.xpl") in the directories specified in the relevant "RpcMethodDir" settings are read next. These directories are also (after the next step) added to the search path the object uses.
    By specific inclusion
    Any methods specified directly by use of "RpcMethod" settings are loaded last. This allows for them to override methods that may have been loaded from the system defaults or the specified directories.

    If a request is made for an unknown method, the object will first attempt to find it by searching the path of directories that were given in the configuration as well as those that are part of the system (installation-level directories). If it is still not found, then an error is reported back to the requestor. By using this technique, it is possible to add methods to a running server without restarting it. It is a potential security hole, however, and it is for that reason that the previously-documented "RpcAutoMethods" setting is provided.  

    Usage Within <Perl> Sections

    To truly unlock the power of having the RPC server attached to a mod_perl environment, the application and configuration of the server should be done within Perl-configuration blocks on the Apache server itself.

    In doing this, two immediate benefits are gained:

    (1)
    The rpc-server object gets created in the master Apache process, rather than within each child as a side-effect of the first request. Especially in cases where there are going to be more than one server in use within the Apache environment, this boosts performance by allowing newly-created children to already have the server object and method table readily available.
    (2)
    It becomes possible to exert more detailed control over the creation and configuration of each server object. Combining the get_method and add_method operations permits ``sharing'' (of a sort) of methods between server objects. Recall from the RPC::XML::Server documentation that, when a method is invoked, the first argument is the server object that is marshalling it.

    The following example illustrates these concepts in a fairly simple environment:

        # In httpd.conf:
        <Perl>
    
    

        # First, create and configure some Apache::RPC::Server objects
    
    

        # One regular one, with the standard settings:
        $main::defobj = Apache::RPC::Server->new(path         => '/RPC',
                                                 auto_methods => 1,
                                                 auto_updates => 1);
        # One version without the default methods, and no auto-actions
        $main::secobj = Apache::RPC::Server->new(no_default => 1,
                                                 path => '/rpc-secured');
    
    

        # Imagine that add_method and/or add_methods_in_dir has been used to
        # add to the methods tables for those objects. Now assign them to
        # locations managed by Apache:
        $Location{'/RPC'} =
            {
                SetHandler  => 'perl-script',
                PerlHandler => '$main::defobj'
            };
        $Location{'/rpc-secure'} =
            {
                SetHandler   => 'perl-script',
                PerlHandler  => '$main::secobj',
                AuthUserFile => '/etc/some_file',
                AuthType     => 'Basic',
                AuthName     => 'SecuredRPC',
                'require'    => 'valid-user'
            };
    
    

        </Perl>
    
    

    Note that the assignment of the "PerlHandler" value was a string representation of the object reference itself. mod_perl performs a sort of ``thaw'' of this string when the location is accessed. Since this class implements itself as a method handler, this causes the "handler()" method for each of the locations to be handed the Apache::RPC::Server object directly. Note also that the value assigned to "PerlHandler" cannot be a lexical variable, or it will be out of scope when the handler is called.  

    DIAGNOSTICS

    All methods return some type of reference on success, or an error string on failure. Non-reference return values should always be interpreted as errors unless otherwise noted.

    Where appropriate, the "log_error" method from the Apache package is called to note internal errors.  

    CAVEATS

    This began as a reference implementation in which clarity of process and readability of the code took precedence over general efficiency. It is now being maintained as production code, but may still have parts that could be written more efficiently.  

    CREDITS

    The XML-RPC standard is Copyright (c) 1998-2001, UserLand Software, Inc. See <http://www.xmlrpc.com> for more information about the XML-RPC specification.  

    LICENSE

    This module is licensed under the terms of the Artistic License that covers Perl. See <http://www.opensource.org/licenses/artistic-license.php> for the license itself.  

    SEE ALSO

    RPC::XML::Server, RPC::XML  

    AUTHOR

    Randy J. Ray <rjray@blackperl.com>


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    USAGE
    Methods
    Apache configuration semantics
    Specifying methods to the server(s)
    Usage Within <Perl> Sections
    DIAGNOSTICS
    CAVEATS
    CREDITS
    LICENSE
    SEE ALSO
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру